Hjulex AB

1-3 個結果,總共 3 個
< 上一頁1下一頁 >
每頁結果數:
供應商
描述
Made of polyamide 6, nylon.
Hardness: 83° Shore D. 
Temperature range: -20°C − +80°C.


To be used on for e.g pallet trucks.
Nylon wheels have a high load capacity, high wear resistance and low weight. Low rolling resistance on smooth surface. Non-marking. Nylon in room temperature has a good resistance to water, oils. organic solvent and alkalis.
Bearing type: K = Ball bearing
技術提供者:
SolidComponentsTM
組態?
不明的
下載
70
加入於
20 七月, 2010
供應商
描述
Center: Polyamide 6, nylon.
Tyre: Injected polyurethane.
Hardness: 98° Shore A. 
Temperature range: -20°C − +80°C.


To be used on for e.g pallet trucks.
Polyurethane tyre on nylon centre gives a wear resistant wheel with floor saving properties. Non-marking. The rolling resistance is slightly higher than for nylon but lower than rubber. Resistant to oils, fats and a wide range of ch
技術提供者:
SolidComponentsTM
組態?
不明的
下載
76
加入於
20 七月, 2010
供應商
描述
Center: Cast iron.
Tyre: Moulded polyurethane.
Hardness: 93° Shore A. 
Temperature range: -18°C − +80°C.


To be used on for e.g pallet trucks.
Heavy duty premium polyurethane firmly bonded to precision machined cast iron core offer low rolling resistance, smooth and noiseless running. Non-marking and floor protective. High abrasion and cut resistance. Elastic - recover to round shape aft
技術提供者:
SolidComponentsTM
組態?
不明的
下載
106
加入於
20 七月, 2010

連絡人詳細資料

地址:
Ji-Te gatan 10
Åstorp, 265 82
Sweden
電話: 042 - 560 00
傳真: 042 - 562 00
網站: www.hjulex.se