修改於:
五月 04,2012
評價:
下載:
761
替代的版本:
供應商零件名稱:
MC33886PVW
名稱: HSOP 20 PIN MC33886 描述: 5.0 A H-Bridge
The 33886 is a monolithic H-Bridge ideal for fractional horsepower
DC-motor and bi-directional thrust solenoid control. The IC
incorporates internal control logic, charge pump, gate drive, and low
RDS(ON) MOSFET output circuitry. The 33886 is able to control
continuous inductive DC load currents up to 5.0 A. Output loads can
be pulse width modulated (PWM-ed) at frequencies up to 10 kHz.
A Fault Status output reports under-voltage, short-circuit, and
over-temperature conditions. Two independent inputs control the two
half-bridge totem-pole outputs. Two disable inputs force the H-Bridge
outputs to tri-state (exhibit high-impedance).
The 33886 is parametrically specified over a temperature range of
-40 °C ≤ TA ≤ 125 °C, 5.0 V ≤ V+ ≤ 28 V. The IC can also be operated
up to 40 V with derating of the specifications. The IC is available in a
surface mount power package with exposed pad for heatsinking.
Features
• 5.0 V to 40 V Continuous Operation
• 120 mΩ RDS(ON) H-Bridge MOSFETs
• TTL /CMOS Compatible Inputs
• PWM Frequencies up to 10 kHz
• Active Current Limiting via Internal Constant OFF-Time PWM (with
Temperature-Dependent Threshold Reduction)
• Output Short-circuit Protection
• Under-voltage Shutdown
• Fault Status Reporting
http://pdf1.alldatasheet.com/datasheet-pdf/view/417778/FREESCALE/MC33886PVW.html 供應商名稱: Freescale
組態 & 下載
評價 & 評論 (1)
標籤 (0)
替代的版本
變更下面的選項以自訂要下載的模型。按一下更新預覽的按鈕，以便將您的變更套用至檢視器。
檢視:
4 個視圖
多個視圖
前視
最高評價
右視
後視
下視
左視
等角視
二等角視
不等角視
目前的工作階段已逾時。請按下「確定」以重新載入頁面，然後再試一次。
下載...
模型已準備好可供下載。<br/>拖曳及置放連結至 SOLIDWORKS 中，或按一下連結來下載檔案。
(需要登入)