其他

1-10 個結果,總共 41 個
< 上一頁12345下一頁 >
每頁結果數:
描述
Increase/decrease the number of decimal places of a dimension. Will effect dual dimensions as well. These macros run as separate methods from within a single macro (.swp) file. So you can't run them using Tools>Macro>Run. They must either be assigned to buttons or dropped into the \SolidWorks\macros directory and assigned a keyboard shortcut.
類別
提供者
公司
.
下載
0
加入於
14 七月, 2019
名稱
描述
Opens the selected assembly/drawing component in a separate window. Selects parent assembly of the selected assembly component. Useful when paired with the "Select Parent" macro along with keyboard shortcuts.
類別
提供者
公司
.
下載
0
加入於
14 七月, 2019
描述
Hide all the surfaces within a part or assembly.
類別
提供者
公司
DD studio
下載
40
加入於
24 七月, 2018
名稱
描述
Macro that will launch the UPG Post-Processor Application from within SOLIDWORKS & includes Post Processor Source files for SOLIDWORKS CAM.
類別
提供者
公司
Dassauly Sytemes
下載
429
加入於
9 十二月, 2017
描述
CamWorks API Help File and also applies to SOLIDWORKS CAM STD & PRO 2018.
類別
提供者
公司
Dassauly Sytemes
下載
142
加入於
29 十一月, 2017
描述
This macro will mirror all the operations of a setup. After programming a part, draw a sketch line. Run the macro, and mirrored tool-paths will be created. The zip file also contains a bitmap image that can be used to create a macro icon in the SOLIDWORKS Graphical User Interface. To be used with SOLIDWORKS CAM Standard or Professional. To be used with SW2018 version or higher.
類別
提供者
公司
Dassauly Sytemes
下載
52
加入於
17 十一月, 2017
描述
We've been there. Working on an assembly and there are a ton of documents open bogging down Solidworks. In order to clear the clutter you have to close each document individually. Not any more. Just run this macro and every document except the active document will be closed.
類別
提供者
公司
Nuline Sensors
下載
373
加入於
29 八月, 2017
描述
I'm constantly using the infinite length center lines in sketches and it's annoying to create them every sketch so I wrote this macro. Now I select the plane or face that I want to sketch on in my model and I press the hot key. A sketch is created with horizontal and vertical infinite length center lines.
類別
提供者
公司
Nuline Sensors
下載
446
加入於
15 八月, 2017
描述
Macro to create a drawing from an assembly. The first sheet of the drawing will have the isometric view of the assembly in the bottom left corner and the BOM in the top left corner. A sheet will be created for each individual component that was selected in the form that pops up with the isometric view in the bottom left corner. User must update paths to their formats before the macro will work properly. Enjoy.
類別
提供者
公司
Nuline Sensors
下載
618
加入於
9 八月, 2017
描述
Easily export DXFs/DWGs from faces of a part. Select single or multiple planar faces in a part and run the macro to automatically export. I assigned it to the hotkey "Ctrl + d". Now all I have to do is have the part open, select the face(s) I want to export and hit "Ctrl + d" and it saves it automatically. No more going through the DXF/DWG Output wizard. Exits cleanly for a variety of situations and error message pops up if it fails to export.
類別
提供者
公司
Nuline Sensors
下載
516
加入於
28 七月, 2017