This macro is similar to the open assembly command used in drawings but works in assemblies instead

沒有提供

沒有提供

Open all parts of an assembly individually and save them all to a parasolid file.

When routing, sometimes we forget to apply material from the master pipe/tube. This macro save lot of time, automatically applying a selected material e.x. AISI 304 to all pipes or tubes part.This macro must be edited with user Library path, and material preference, first.

Each configuration will not have any tolerances.In one configuration all dimensions will be set to nominal value plus lower tolerance (which is usually negative). In the other configuration all dimensions will be set to nominal value plus upper tolerance (usually positive)

Macro di Fabrizio che imposta e rimuove l'attributo di Sola Lettura dei files caricati

Macro to send email with asembly name in subject.

Updated 2020-11-03...When originally written (with SW2008) this macro saved a part file copy of your original file, using the defeature tool to strip out all internal volumes. It then got the surface area of that defeatured part, inserted the surface area into the custom properties of the original file and then deleted the defeatured copy.Unfortunately the defeature tool no longer works that way and the API's are still not accessible (at least in all versions of SW up to and including 2018; the year I'm using).In order for the macro to function correctly you need to run the defeature tool at least once and save the settings...menu -> tools -> defeature...A side bar will open for the tool and you need to uncheck everything and make all the selection boxes blank (except for the store settings option on the last page).left side bar -> next -> next -> next -> wait -> next -> Check “Just store my settings for future use” -> OK (Tick)If they ever unlock the API's then I will most likely update the macro but until then there is no point.The temp file was originally being saved to and then deleted from the desktop but this has proven to be a bit sketchy in regards to user privileges... not it will save to and delte from the location of the open file. So as long as you have automated write ability to that folder then you are good to go.This macro will not work with surface models.If you have never run the defeature tool before the macro will flatten the file and most likely spit out the entire surface area including internals.

Macro to save Assembly as Part with "Exterior Components" option.