修改於:
三月 29,2022
評價:
下載:
18
替代的版本:
模型描述:
Bicycle_Rack_Tesla_Model_Y
名稱: Bicycle Rack for Tesla Model Y 描述: This design for a car-mounted bicycle rack was created by me in 2021. The primary requirements for this design are (1) reduced drag while traveling long distances, and (2) easy mounting and removal. Although I designed it for my Tesla Model Y, it will probably work on other cars, especially if the strut that goes into the 2" receiver is lengthened. The design requires fork mount brackets to be purchased (not shown in the model) and the front wheels stored inside the car. It is also intended that one of the bike pedals be removed and one of the handlebars be rotated. These compromises allow the bikes to sit very close to the car for reduced wind drag. I offer it as a concept to be improved, modified, or fabricated as is. The features in Strut4 that relate to the removable handle might need to be adjusted to miss front chainwheels on some bikes. I don't use the handle at all since my bikes are lightweight and the handle doesn't add much functionality when mounting and dismounting the rack to the car. I do not intend to be compensated for this design, but I do expect that if anyone benefits from it, they donate generously to either Ujamaa Place (https://ujamaaplace.org/) or Honor the Earth (https://www.honorearth.org/). If those organizations no longer exist, donate to the United Nations (https://www.un.org/).
Peter Truitt
ptruitt@protonmail.com
https://muckrack.com/peter-truitt/articles
https://www.youtube.com/channel/UCP3r5IN8wSZODc8HtfaucKw
組態 & 下載
評價 & 評論 (0)
標籤 (0)
替代的版本
變更下面的選項以自訂要下載的模型。按一下更新預覽的按鈕，以便將您的變更套用至檢視器。
檢視:
4 個視圖
多個視圖
前視
最高評價
右視
後視
下視
左視
等角視
二等角視
不等角視
Default Off-the-shelf excluded
目前的工作階段已逾時。請按下「確定」以重新載入頁面，然後再試一次。
下載...
模型已準備好可供下載。<br/>拖曳及置放連結至 SOLIDWORKS 中，或按一下連結來下載檔案。
(需要登入)