修改於:
二月 21,2019
評價:
下載:
113
替代的版本:
供應商零件名稱:
MMC3630KJ
名稱: MMC3630KJ-BGA8 1.2X1.2x0.5-MEMSIC 描述: The MMC3630KJ is a complete 3-axis magnetic
sensor with on-chip signal processing and integrated
I2C bus. The device can be connected directly to a
microprocessor, eliminating the need for A/D
converters or timing resources. It can measuremagnetic
fields within the full scale range of 30
Gauss (G), with 1 mG per LSB resolution at 16 bits operation
mode and 2 mG total RMS noise level,
enabling heading accuracy of ±1º in electronic
compass applications. Contact MEMSIC for access to
advanced calibration and tilt-compensation algorithms.
An integrated SET/RESET function provides for the
elimination of error due to Null Field output change
with temperature. In addition it clears the sensors of
any residual magnetic polarization resulting from
exposure to strong external magnets. The
SET/RESET function can be performed for each
measurement or periodically as the specific
application requires.
The MMC3630KJ is packaged in an ultra-small low
profile BGA package (1.2x 1.2 x 0.5 mm) and with an
operating temperature range from -40 °C to +85 °C.
The MMC3630KJ provides an I2C digital output with
400 KHz, fast mode operation.
組態 & 下載
評價 & 評論 (0)
標籤 (0)
替代的版本
變更下面的選項以自訂要下載的模型。按一下更新預覽的按鈕，以便將您的變更套用至檢視器。
檢視:
4 個視圖
多個視圖
前視
最高評價
右視
後視
下視
左視
等角視
二等角視
不等角視
目前的工作階段已逾時。請按下「確定」以重新載入頁面，然後再試一次。
下載...
模型已準備好可供下載。<br/>拖曳及置放連結至 SOLIDWORKS 中，或按一下連結來下載檔案。
(需要登入)