Encoder Type:
AV20 Solid Shaft Optical Light Mill Duty Encoder
PPR:
1
25
60
100
120
200
240
250
256
300
360
500
512
600
625
720
1000
1024
1200
1250
1440
2000
2048
2500
2540
3600
Input/Output Voltage:
5-28v In/Out (7272)
5-28v In/Open Collector Out (7273)
5-28v In, 5v Out (7272)
Shaft Size:
1/4" diameter shaft w/flat
3/8" diameter shaft w/flat
10 mm diameter shaft w/flat
1/4" diameter shaft w/o flat
3/8" diameter shaft w/o flat
10 mm diameter shaft w/o flat
Connector Options:
10 pin MS style w/o Plug, Avtron Pinout
10 pin MS style w/o Plug, Reverse Phasing
10 pin MS style w/Plug, Avtron pinout
10 pin MS style w/plug, Reverse Phasing
Cable (18" or special length)
6 pin MS style w/o Plug
6 pin MS style w/o Plug, Reverse Phasing
6 pin MS style w/plug, Avtron pinout
6 pin MS style on cable w/plug, Reverse Phasing
7 pin MS style w/o Plug, Avtron Pinout
7 pin MS style on cable w/o Plug, Reverse Phasing
7 pin MS style w/plug, Avtron pinout
7 pin MS style w/plug, Reverse Phasing
M12 on cable, Turck Pinout (use 00W Option Code)
M12 on cable, USA Pinout (Use 00W Option Code)
Connector Direction:
Flange:
Sq. Flange w/1.25 in. Male Pilot, 1.75 in. B.C.
2 in. Servo Flange w/1.25 in. Male Pilot, 1.875 in. groove
Sq. Flange w/1.181 in. Female Pilot, 1.75 in. B.C.
2 in. Servo Flange w/1.181 in Female Pilot, 1.875 in. groove
Additional Mounting:
No Additional Face Drill Holes
4 x 6-32 tapped holes on a 2 in. B.C.
4 x 10-32 tapped holes on a 1.625 in. B.C.
3 x 4-40 tapped holes on a 1.5 in. B.C.
Sealing:
Shaft Seals (best all around)
(NOT Recommended) No Seals
Channels:
All Signals (A,A\,B,B\,Z,Z\) (NA w/6, 7 pin conns.)