修改於:
八月 11,2015
評價:
下載:
242
替代的版本:
供應商模型描述:
217-2613
名稱: 8 inch Omni Wheel 描述: Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drivetrain. VEXpro Omni Wheels are manufactured from Glass-filled Nylon with high-traction rubber rollers. Compatible with VEXpro VersaHubs for driving with a sprocket or can be used with bearings for use on an axle. These omni-wheels were designed from the ground up to give the smoothest ride possible. Our construction method, using a dual roller design, allows for a constant contact patch with a narrow profile. Each roller is tailored for the individual wheel diameter, and provides the correct, constant radius. We don't share rollers between wheel types -- these wheels aren't "almost round" they're actually round. This smooth-ride provides higher efficiency and reduces wasted power! Omni wheel assembly hardware is separate from sprocket mounting hardware. Sprockets are screwed into captive 8-32 standoffs. This allows for easy removal and replacement of sprockets without disassembling the entire wheel. No more worrying about your whole wheel falling apart just because you wanted to remove the sprocket. Ships fully assembled.
組態 & 下載
評價 & 評論 (0)
標籤 (0)
替代的版本
變更下面的選項以自訂要下載的模型。按一下更新預覽的按鈕，以便將您的變更套用至檢視器。
檢視:
4 個視圖
多個視圖
前視
最高評價
右視
後視
下視
左視
等角視
二等角視
不等角視
目前的工作階段已逾時。請按下「確定」以重新載入頁面，然後再試一次。
下載...
模型已準備好可供下載。<br/>拖曳及置放連結至 SOLIDWORKS 中，或按一下連結來下載檔案。
(需要登入)
VEX Robotics
VEX Robotics 1519 Interstate 30 West Greenville , Texas , 75402 United States
此供應商的所有產品