修改於:
八月 12,2015
評價:
下載:
39
替代的版本:
供應商模型描述:
217-4017
名稱: 500 ThunderHex Stock (3 feet) 描述: ThunderHex Stock & Bearings will revolutionize the ways teams use hex shaft. ThunderHex Stock works in all applications where 1/2" Hex Shaft will work and also includes rounded corners. These rounded corners allow the shaft to pilot inside a 13.75 mm round (ThunderHex) Bearing instead of a standard 1/2" Hex Bearing. This eliminates some difficult manufacturing tolerances and results in a MUCH smoother end result. Simply put, ThunderHex Bearings are the best way to create smooth-running hex shafts, and ThunderHex Stock helps you accomplish this without a lathe. Also, since you're essentially putting a round peg in a round hole, no more struggling to align the hex of your shaft with the hex hole of your bearing. All ThunderHex Stock also includes a subtle but very useful feature: a 0.201" hole through the center. This hole provides a clearance fit for a #10 bolt or can be tapped for 1/4-20 bolts. This means that you no longer need a precision lathe to create custom-length, high-strength standoffs; simply cut the ThunderHex shaft to size and tap it with a 1/4-20 (or 1/4-28) thread.
組態 & 下載
評價 & 評論 (0)
標籤 (0)
替代的版本
變更下面的選項以自訂要下載的模型。按一下更新預覽的按鈕，以便將您的變更套用至檢視器。
檢視:
4 個視圖
多個視圖
前視
最高評價
右視
後視
下視
左視
等角視
二等角視
不等角視
目前的工作階段已逾時。請按下「確定」以重新載入頁面，然後再試一次。
下載...
模型已準備好可供下載。<br/>拖曳及置放連結至 SOLIDWORKS 中，或按一下連結來下載檔案。
(需要登入)
VEX Robotics
VEX Robotics 1519 Interstate 30 West Greenville , Texas , 75402 United States
此供應商的所有產品